Thermodynamic Steam trap

Inverted Bucket Steam Trap Body: Carbon Steel, Stainless Steel, Ductile Iron Float ball: SS304 Bolt: SS304 Bracket: SS304 Pin: SS304 Bonnet: Carbon Steel, CF8 Disc: 2Cr13, SS304 Seat: 2Cr13, SS304 Gasket: Graphite+SS304 Nominal Diameter: DN20 to DN32 Nominal Pressure: PN10 to PN64 Design and Manufacture: EN26704, ISO6552 Face to Face Dimension: EN26554 Inspection and Test: EN26948 Dimension Unit:mm DN L B C 20 210 94 137 25 210 94 137 32 210 94 137

Bimetallic Steam Trap Body: Carbon Steel, Stainless Steel Cover: Stainless Steel Sealing Disc: Stainless Steel Cap: Stainless Steel Nominal Diameter: DN15 to DN50 Nominal Pressure: Class150 to Class300, PN16 to PN40 Design and Manufacture: EN26704, ISO6552 Face to Face Dimension: EN26554 Inspection and Test: EN26948 Dimensions Unit: mm DN L H1 H2 15 150 111 23 20 150 111 23 25 160 111 26 32 210 118 27 40 230 123 30 50 230 123 30

Thermostatic Steam Trap Body: Carbon Steel, Stainless Steel Cover: Stainless Steel Sealing Disc: Stainless Steel Cap: Stainless Steel Nominal Diameter: DN15 to DN50 Nominal Pressure: Class150 to Class300, PN16 to PN40 Design and Manufacture: EN26704, ISO6552 Face to Face Dimension: EN26554 Inspection and Test: EN26948 Dimensions Unit: mm DN L H1 H2 15 100 58 55 20 100 58 55 25 120 58 55 32 150 68 68 40 150 68 68 50 160 68 68

Ball Float Steam Trap Body: Carbon Steel, Stainless Steel, Ductile Iron Float ball: SS304 Bolt: SS304 Bracket: SS304 Pin: SS304 Bonnet: Carbon Steel, CF8 Disc: 2Cr13, SS304 Seat: 2Cr13, SS304 Gasket: Graphite+SS304 Nominal Diameter: DN15 to DN100 Nominal Pressure: PN10 to PN64 Design and Manufacture: EN26704, ISO6552 Face to Face Dimension: EN26554 Inspection and Test: EN26948 Dimensions Unit: mm DN L H1 H2 15 150 115 80 20 150 115 80 25 160 115 80 32 230 150 100 40 230 150 100 50 230 150 100 65 450 350 170 80 450 350 170 100 450 350 170

Pneumatic Angle Control Valve Body: WCB, WC6, CF8, CF8M Bonnet: WCB, WC6, CF8, CF8M Seat: SS304, SS316, Stellite Plug Metal Sealing: SS304, SS316, Stellite Plug Soft Sealing: SS304, SS316, Stellite Cage: SS304, SS316 Guide Sleeve: SS304, SS316 Stem: SS304, SS316 Balanced Piston: Steel, Aluminium Balanced Piston Ring: Fluorine Ring, SS+Reinforced PTFE, Flexible Graphite Ring Nominal Size: DN20 to DN400 Pressure: PN 16 to PN 100, Class 150 to Class 600 End Connection: Flanged, RF, MF, RTJ Flow Characteristics Linear, Percentage, Quick Open Allowable range 50: 1 (CV<6.3 30: 1) Rated Cv value Percentage CV 1.6 to 630 ,linear CV 1.8 to 690 Allowable leakage Metal seal: IV grade(0.01% rated capacity) Soft seal: VI grade(foam grade) Performance Pneumatic Electric Allowable tolerance, % ±1.5 ±1.0 Return difference, % ≤1.5 ≤1.0 Dead zone, % ≤0.6 ≤1.0 Difference from beginning to end point, % ±2.5 ±2.5 Rated travel difference, % ≤2.5 ≤2.5 Note : specification on the basis of control valve with positioned and PTFE packing. Dimensions Nominal Diameter DN 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 L 115 115 130 130 150 170 190 215 250 275 325 375 375 425 475 H1 95 145 193 276 330 360 420 470 520 H2 205 238 344 421 483 512 562 620 672 H3 375 398 438 521 560 575 680 750 835 H4 700 _ H5 95 110 _ ΦD1 305 340 370 405 460 525 590 700 805 950 _ ΦD2 335 370 400 435 490 555 630 740 845 990 _ H 340 390 632 930 A 228 272 400 610 Weight(kg) 24 25 28 35 37 68 80 95 148 170 231 275 475 522 624

Electric 3 way control valves provide automated mixing or diverting of process flow through a three-port design.

Triple offset butterfly valves provide low-wear metal sealing and reliable isolation for demanding pipeline service.

Pressure relief valves automatically discharge excess pressure to protect piping, vessels and process equipment.

Electric actuated diaphragm valves provide automated shutoff with isolated fluid handling and motor-driven operation.

Where slurry, sludge or solids-bearing media must be isolated remotely, an electric actuator allows the knife gate to be opened and closed without local manual operation. The gate travels through the flow path to provide direct shutoff while keeping the bore relatively clear when open. SVR Global serves projects seeking an Electric Actuated Knife Gate Valve Manufacturer in USA, with electrically operated designs suited to automated isolation and repeated cycling in demanding process lines. Technical Specifications Parameter Specification Product Type Electric Actuated Knife Gate Valve Size Range DN50-DN900 Pressure Rating PN10, PN16, Class 150 Material Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel Standards MSS SP-81, MSS SP-151, ASME B16.5, ASME B16.47 Grades ASTM A216 WCB; ASTM A351 CF8 / CF8M / CF3M; ASTM A995 Gr. 4A / 5A Valve Design Unidirectional, Bidirectional Body Configuration Wafer, Lug, Flanged Actuator Type Electric Multi-Turn Actuator Control Mode On/Off End Connections Wafer, Lug, Flanged