SVR Global Product Range

Balancing Valve Body: Cast Iron, Ductile Iron Disc: Ductile Iron, SS304, SS316, Bronze Shaft: SS410, SS431 Seat Ring: EPDM, NBR O-Ring: EPDM, NBR Bushing: PTFE, Bronze Nominal Diameter: DN50 to DN150 Nominal Pressure: Class150, PN16 Design and manufacturing: DIN EN 13709, DIN 3356 Flanged End Dimensions: EN1092-1 PN25 Face to face Dimensions: EN558-1 Inspection and Test: EN 12266-1 Dimensions Unit: mm DN L H 50 230 260 65 290 290 80 310 310 100 350 325 125 400 355 150 480 390

Needle Valve Needle Valve type: bar stock body or forged body. Pattern: Straight or Angle. Size: 1/2″ to 2″ Body material: SS304, A182 F304 Seal Material: Nitrile or Viton Pressure Ratings: 6000PSI, Class 1500 Dimensions Size A B C±3 D ¼” 25 55 92 50 3/8” 25 60 92 55 ½” 32 75 98 55 ¾” 36 75 114 65

Surge Anticipator Valve Body: Ductile Iron, Cast Stainless Steel, Bronze Cover: Ductile Iron, Cast Stainless Steel, Bronze Disc Retainer: Ductile Iron, Stainless Steel, Bronze Diaphragm Washer: Ductile Iron, Stainless Steel, Bronze Trim: Stainless Steel, Bronze Disc: Stainless Steel, Bronze Guide: Stainless Steel, Bronze Seat: Stainless Steel, Bronze Seal: NBR, EPDM, HNBR Diaphragm: Nylon Reinforced EPDM Rubber Stem: Stainless Steel Nut: Stainless Steel Spring: Stainless Steel Nominal Diameter: DN50 to DN600 Nominal Pressure: PN10, PN16, PN25, PN40 Design Standards: EN1074-5, BS EN1567 Test Standard: ISO5208, EN12266-1 Connection: EN558-1, ISO5752 Flange Drilling: EN1092-2, ISO7005-2, ANSI, JIS, AS2129 Dimensions DN L D H1* K S 50 230 139 85 173 3/8” 65 290 159 95 198 3/8” 80 310 179 102 226 3/8” 100 350 214 112 265 ½” 125 350 214 127 265 ½” 150 480 333 145 351 1½” 200 600 407 172 436 3/4” 250 730 476 205 524 1” 300 850 526 232 606 1” 350 850 526 262 606 1” 400 1100 624 292 741 11/2” 450 1100 624 325 741 11/2” 500 1250 720 360 1002 2” 600 1450 835 425 1308 2”

Foot Valve Body: Cast Iron, Ductile Iron, SS304, SS316 Disc: Carbon Steel, Stainless Steel, SS304, SS316 Seat: F304, F316 Mesh: SS304 Nominal Size: DN50 to DN300 Nominal Pressure: PN16, Class150 Dimensions Unit: mm DN D D1 D2 b-f z-*d hO H 50 140 110 90 16-3 4-14 17 142 65 160 130 110 16-3 4-14 25 180 80 185 150 125 18-3 4-18 32 197 100 205 170 145 18-3 4-18 40 230 125 235 250 175 20-3 8-18 43 270 150 260 225 200 20-3 8-18 38 297 200 315 280 255 22-3 8-18 65 382 250 370 335 310 24-3 12-18 84 460 300 435 395 262 24-4 12-23 90 530

Suction Diffuser 1.Body: Cast Iron, Ductile Iron 2.O-Ring: EPDM, NBR 3.Bonnet: Ductile Iron 4.Screw: Copper Alloy, Stainless Steel 5.Filter: SS304 6.Nut: SS304 7.Ball Valve: Alloy, Stainless Steel Nominal Diameter: DN50*DN40 to DN500*DN500 Nominal Pressure: Class125, Class150, Class300, PN16, PN25, PN40 End Connection: Flanged Dimensions NPS DN L1 L2 L3 H NPT Kv Cv 2″*1 1/2″ 50*40 114.3 114.3 253 125 3/4” 18 21 2″*2″ 50*50 114.3 114.3 253 125 3/4” 64.5 75.2 2 1/2″*2″ 65*50 127 127 270 125 3/4” 64.5 75.2 2 1/2″*2 1/2″ 65*65 127 127 270 138 3/4” 64.5 75.2 3″*2″ 80*50 139.7 139.7 270 138 3/4” 109 127.2 3″*2 1/2″ 80*65 139.7 139.7 284 143 3/4” 109 127.2 3″*3″ 80*80 139.7 139.7 284 143 3/4” 143 166.9 4″*3″ 100*80 165 165 328 166 1” 143 166.9 4″*4″ 100*100 165 165 334 172 1” 252 294.1 5″*4″ 125*100 190.5 190.5 345 172 1” 252 294.1 5″*5″ 125*125 190.5 190.5 394 223 1” 252 294.1 6″*4″ 150*100 192 192 394 223 1” 498 581.2 6″*5″ 150*125 203 203 423 250 1” 498 581.2 6″*6″ 150*150 203 203 423 250 1” 498 581.2 8″*5″ 200*125 203 203.2 455 250 1” 585 682.7 8″*6″ 200*150 228.6 228.6 487 312 1” 585 682.7 8″*8″ 200*200 228.6 228.6 539 315 1 1/4” 910 1062 10″*8″ 250*200 279.4 228.6 542 355 1 1/4” 910 1062 10″*10″ 250*250 279.4 279.4 551 355 1 1/4” 910 1062 12″*8″ 300*200 280 279.4 678 454 1 1/4” 1480 1727.2 12″*10″ 300*250 304.8 280 678 458 1 1/4” 1480 1727.2 12″*12″ 300*300 304.8 304.8 678 458 1 1/4” 1480 1727.2 14″*10″ 350*250 318 328 678 460 1 1/4” 2150 2509.2

Triple Duty Valve 1.Body: Cast Iron 2.Cover Flange: Cast Iron 3.Disc: A536 Nickle Plated/Bronze B62 4.Stem: SS410 5.Seat Guide: A536 Nickle Plated Ductile Iron 6.Flange Gland: Cast Iron 7.Packing: Non-Asbestos 8.Spring: 300 Series Stainless Steel 9.Packing Gland: Cast Iron 10.Stem Guide: Ductile Iron 11.Seat Ring: A536 Nickle Plated Ductile Iron 12.Seat Seal: EPDM O-Ring 13.Disc Seat: EPDM O-Ring Dimensions Unit: mm DN D1 D2 D3 n-ΦD L T f H(Min) H(max) A B 65 118 145 185 4-Φ19 304 19 3 243 272 187 117 80 132 160 200 8-Φ19 305 19 3 273 307 208 98 100 156 180 220 8-Φ19 355 19 3 273 307 244 111 125 184 210 250 8-Φ19 445 19 3 349 400 305 140 150 211 240 285 8-Φ23 525 19 3 362 419 359 168 200 266 295 310 12-Φ23 716 20 3 520 579 481 233 250 319 355 105 12-Φ28 762 22 3 585 653 516 248 300 370 410 460 12-Φ28 967 24.5 4 677 762 611 356

Pneumatic Cage Control Valve Body: WCB, WC6, CF8,CF8M Lower Sleeve: Stainless Steel Valve Plug: Stainless Steel Upper Sleeve: Stainless Steel Valve Rod: Stainless Steel Gasket: Stainless Steel Stud: Stainless Steel Bonnet: WCB, WC6, CF8, CF8M Spring: Stainless Steel Stuffing: PTFE, Soft Graphite Dimensions       DN(mm) L     H1     H3     H4     H5 Actuator PN16 Class 150 PN64, Class 300 PN100 Class 600 A B C H2 H6 H7 20 184 194 206 130 254 337 44 282 260 220 258 180 465 25 184 197 210 130 254 337 48 282 260 220 258 180 465 32 222 235 251 152 320 386 56 282 260 220 258 180 465 308 260 220 280 180 465 40 222 235 251 152 320 402 65 282 260 220 258 180 465 308 260 220 280 180 465 50 254 267 286 159 320 402 76 308 260 220 280 180 465 65 276 292 311 205 365 630 100 308 220 280 180 305 260 394 270 360 236 580 305 80 298 317 337 205 365 630 100 308 220 280 180 305 260 394 270 360 236 580 305 100 352 368 394 208 373 635 110 394 270 360 236 580 305 125 400 500 500 274 484 698 126 394 270 360 236 580 305 498 320 435 310 675 330 150 451 473 508 333 529 705 149 394 270 360 236 580 305 498 320 435 310 675 330 200 543 568 610 370 561 730 198 498 320 435 310 675 330

Monel Lug Butterfly Valve Body: Monel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Hastelloy Disc: Stainless Steel, Duplex Stainless Steel, Hastelloy, Titanium Stem: SS316 Seat: EPDM, NBR, Viton Shaft: SS316 Packing Seal: Graphite, PTFE Nominal Size: DN50 to DN2000 Nominal Pressure: Class 150 to Class 600, PN10 to PN64 End Connection: Lug Operation: Manual, Lever Operated, Electric Actuated, Pneumatic Actuated Face to Face Dimensions: ANSI B16.10, API 609, MSS-SP-68, ISO 5752 Flanged End Dimension: ASME B16.5, JIS, DIN Dimensions Size A B C D E F d G H J L Wt(kg) DN Inch 50 2″ 126 78 14 117 9 50 8 70 31 34 43 2.8 65 2 1/2″ 134 84 14 131 9 50 8 70 45 36 46 3.7 80 3″ 138 92 14 176 9 50 8 70 64 36 46 5.1 100 4″ 167 114 14 206 11 70 10 90 91 40 52 6.9 125 5″ 180 129 18 236 14 70 10 90 110 44 56 9.3 150 6″ 203 144 18 258 14 70 10 90 146 44 56 10.5 200 8″ 228 179 25 321 17 102 12 125 193 50 60 17.4 250 10″ 266 216 25 395 22 102 12 125 241 57 68 28.1 300 12″ 291 247 25 461 22 102 12 125 292 66 78 40 350 14″ 332 273 30 511 27 125 14 150 329 62 78 55 400 16″ 363 317 30 580 27 125 14 150 376 84 102 85 450 18″ 397 348 39 630 36 140 18 175 425 94 114 114 500 20″ 425 393 39 700 36 140 18 175 475 110 127 144 600 24″ 498 453 49 823 46 165 22 210 573 120 154 227

Monel Wafer Butterfly Valve Body: Monel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Hastelloy, Alloy Steel, Inconol, Incoloy, Titanium, Bronze Disc: Stainless Steel, Duplex Stainless Steel, Hastelloy, Titanium Stem: SS316 Seat: EPDM, NBR, Viton Shaft: SS316 Packing Seal: Graphite, PTFE Operation: Manual, Lever Operated, Electric, Pneumatic Actuated Nominal Size: DN50 to DN200 Nominal Pressure: PN10 to PN64, Class150 to Class300 Face to Face Dimensions: ANSI B16.10, API 609, MSS-SP-68, ISO 5752 End Dimensions: ASME B16.5, JIS B2210, DIN Dimensions Unit: mm DN L L1 D D1 D2 D3 D4 ø H1 H2 H3 Z-Фd 1.0 1.6 1.0 1.6 50 42 220 52.9 125 125 92 77 57 12.6 70 147 32 4-Ф23 4-Ф23 65 44.7 220 64.5 145 145 110 77 57 12.6 76 155 32 4-Ф23 4-Ф23 80 45.2 255 78.8 160 160 121 77 57 12.6 92 164 32 8-Ф20 4-Ф20 100 52.1 255 104 180 180 153 92 70 15.78 106 175 32 4-Ф23 4-Ф23 125 54.4 290 123.3 210 210 176 92 70 18.92 119 194 32 4-Ф23 4-Ф23 150 55.8 290 155.6 240 240 207 92 70 18.92 132 206 32 4-Ф25 4-Ф25 200 60.6 340 202.5 295 295 259 115 89 22.1 162 273 45 4-Ф25 4-Ф295

Monel Globe Valve Body: Monel 400, Monel K500, Monel 600, Duplex Stainless Steel, Super Duplex Stainless Steel, Alloy 20, CN7M, Hastelloy, Carbon Steel, WC6, WC9, C5, C12, LCB, CF3M Disc: Monel 400, Monel K500, Monel 600,Duplex Stainless Steel, Super Duplex Stainless Steel, Alloy 20, CN7M, Hastelloy, Carbon Steel, WC6, WC9, C5, C12, LCB, CF3M Trim: SS304, SS316, SS304L, SS316L, 13%Cr.Steel, Stellite, Hastelloy, Alloy 20, Duplex Stainless Steel, Super Duplex Stainless Steel Gland Packing: Graphite, PTFE End Connections: Flanged, Socketweld, Buttweld Operations: Handwheel Operated, Electric Actuated, Pneumatic Actuated Nominal Size: DN50 to DN600 Nominal Pressure: PN 1.0 to 25 Mpa, Class 150 to 2500 Design and Manufacture Standard: ANSI B16.34, API 600, API 6D, API 603, BS1414 Face to Face Dimension: ANSI B16.10, API 6D Flanged End: ANSI B16.5, MSS-SP-44 to API605 Butt welded End: ANSI B16.5 Inspection and Test: API 598, API 6D Dimensions Unit:mm Class150 DN L L1 L2 H W 50 203 216 203 350 220 65 216 229 216 362 250 80 241 254 241 385 280 100 292 305 292 400 320 125 356 369 356 455 320 150 406 419 406 537 400 200 495 508 495 707 450 250 622 635 622 788 560 300 698 711 698 820 580